1 / 5
Robot Storage Devices Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the results of a challenge I gave myself - create a robot with as many articulated joints as possible that…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the results of a challenge I gave myself - create a robot with as many articulated joints as possible that prints in one piece with no support and no infill.
I needed to build columns into the model to support the front of the robot - so I made holes that can hold memory cards and thumb drives.
Don't have a 3D printer? Just want one already printed? buy one at my shop
Features:
- No support, No infill, Prints in one piece
- Can hold 2 SD Cards, 3 USB thumb drives, 4 micro SD cards and 2 nano sims
- 17 moving joints
- 2 Lego-compatible holes on the back so you can build the robot a back pack
If you print this please post a "make"
Category: Gadgets