1 / 4
Keyboard Enclosure Breeze Rev1 (incl. Gust) - Unofficial — zdjęcie 1
1 / 4

Keyboard Enclosure Breeze Rev1 (incl. Gust) - Unofficial

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad).

Ocena
0 / 5
Polubienia
7
Pobrania
18
Wydruki
0
Wyświetlenia
264
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad) from afternoonlabs.com, it uses:

  • 7x M3 screws 4mm for the PCB
  • 8 10mm for the faceplates.
  • The SVG EPS, AI and DXF files is to laser cut the faceplates, my best try was with Stainless Steel with 1.5mm (print the gaskets to fill the gap and close the side).
  • If you decide to print the faceplates, make sure the upper part faces the bed (the squished layer has to be on top to better fit the switches. I used a transparent Overture PETG at the pictures.

Changes:

April 1st, 2021:

1 - Added clearance for the USB cable. (V3 Enclosure Files)
2 - Add clearance for the TRSS cable. (V3 Enclosure Files)
3 - Added gasket to fit a thinner plate (1.5mm Stainless Steel) and close the gap between the plate and the PCB. (Gasket Files, might be a good think to print in TPU, if I have a few bucks left this month I can try it :) ).
4 - Added various files to be used for laser cutting (.svg, .eps .ai and .dxf)

Let me know if you need any change!