1 / 4
Keyboard Enclosure Breeze Rev1 (incl. Gust) - Unofficial — image 1
1 / 4

Keyboard Enclosure Breeze Rev1 (incl. Gust) - Unofficial

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad).

Rating
0 / 5
Likes
7
Downloads
18
Makes
0
Views
264
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad) from afternoonlabs.com, it uses:

  • 7x M3 screws 4mm for the PCB
  • 8 10mm for the faceplates.
  • The SVG EPS, AI and DXF files is to laser cut the faceplates, my best try was with Stainless Steel with 1.5mm (print the gaskets to fill the gap and close the side).
  • If you decide to print the faceplates, make sure the upper part faces the bed (the squished layer has to be on top to better fit the switches. I used a transparent Overture PETG at the pictures.

Changes:

April 1st, 2021:

1 - Added clearance for the USB cable. (V3 Enclosure Files)
2 - Add clearance for the TRSS cable. (V3 Enclosure Files)
3 - Added gasket to fit a thinner plate (1.5mm Stainless Steel) and close the gap between the plate and the PCB. (Gasket Files, might be a good think to print in TPU, if I have a few bucks left this month I can try it :) ).
4 - Added various files to be used for laser cutting (.svg, .eps .ai and .dxf)

Let me know if you need any change!