Noctua adapter for Micro Swiss NG Direct Drive Extruders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit a Noctua NF-A4 fan to the Micro Swiss NG Direct Drive Extruder
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clip-on adapter to fit a ultra silent Noctua NF-A4 tool fan to the Micro Swiss NG Direct Drive Extruder.
The original casing of the NG extruder is made to accommodate the tool fan from the stock Ender extruder. However, I found that my Noctua fan was oversized for this setup. So, I took the initiative to design this convenient adapter.
The adapter easily clips onto the casing. If the fan cables are securely fastened to the other cables, the adapter will remain steadfastly in place without the need for screws or adhesive. I can vouch for its stability, having used it successfully this way for approximately a year without any issues.
Best printed face down as shown in the attached screenshot.