Dart Zone Max Outlaw Spring Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spring spacer for DZM Outlaw
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 444
- Wydruki
- 4
- Wyświetlenia
- 1538
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To install this spring spacer, open up the blaster and remove the spring/plunger guide peg. Slide the spacer over the peg, replace peg into blaster, then close up the blaster.
Closing the blaster may be a pain as the parts have a tendency to try and splay open, but it can be done.
The .5in spring spacer should yield between 140 and 145 fps, and I haven't tested the .25, but you can probably expect somewhere between stock and 145fps.
You may be able to stack the two spring spacer and achieve even higher, but I wasn't able to get the blaster to close.
Don't have a printer? Order from OOD! Affiliate link!