Dart Zone Max Outlaw Spring Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spring spacer for DZM Outlaw
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 444
- Makes
- 4
- Views
- 1,538
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To install this spring spacer, open up the blaster and remove the spring/plunger guide peg. Slide the spacer over the peg, replace peg into blaster, then close up the blaster.
Closing the blaster may be a pain as the parts have a tendency to try and splay open, but it can be done.
The .5in spring spacer should yield between 140 and 145 fps, and I haven't tested the .25, but you can probably expect somewhere between stock and 145fps.
You may be able to stack the two spring spacer and achieve even higher, but I wasn't able to get the blaster to close.
Don't have a printer? Order from OOD! Affiliate link!