Mattress Frame Leveler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My bed wasn't level, so I made a little cup to keep the roller in place, but otherwise just a puck.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Made in OpenSCAD.
Needed to level my bed (for sleeping, not printing), so I fidgited around in OpenSCAD until I got kinda the right thing.
Dimensions:
50mm diameter
20mm total height
15mm “working height” for the depression in it
Beveled lip to maybe keep it from chipping hopefully?
Printed most of the way out with Elegoo PLA on Sovol SV06. Initially ran out of filament... However, what is printed out is quite strong, but did deform a bit over time.
sliced used PrusaSlicer. Gyroid infill @ 15%. Nozzle temp @ 210 c for first layer, 215 for the rest. Bed temp was a steady 60 c.
followed settings for setting printer up from: https://www.reddit.com/r/Sovol/comments/11ov0pv/sovol_sv06_prusa_slicer_profile_recommendations/