OVERTURE PETG Filament Profile for Bambu X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OVERTURE PETG Filament Profile for Bambu X1C
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 524
- Wydruki
- 0
- Wyświetlenia
- 1835
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
10/21/2023 Important Update: I have found the shrinkage rate that the generic profile I used as a base is off. I have found black is around 98 and clear is 99. Each color may be different. What I did to figure it out was print a 10x10x10mm cube and measure it and calculate the shrinkage. I hope this helps someone else.
Here is my tuned profile for OVERTURE PETG. I found one on discord but it did not work for me.
So I tuned it in Orca with a .4 nozzle and a .2 profile. It may work for other printer, nozzles, layer height. YMMV
I would consider this a starting point not a one size fits all. Finer tuning may be required.
I hope this helps someone. I welcome any feedback or suggestions.
10/2/23 Update: After some fine tuning I found that the shrinkage settings need to go to 99 instead of 95. I will update the files soon.