OVERTURE PETG Filament Profile for Bambu X1C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OVERTURE PETG Filament Profile for Bambu X1C
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 527
- Makes
- 0
- Views
- 1,849
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
10/21/2023 Important Update: I have found the shrinkage rate that the generic profile I used as a base is off. I have found black is around 98 and clear is 99. Each color may be different. What I did to figure it out was print a 10x10x10mm cube and measure it and calculate the shrinkage. I hope this helps someone else.
Here is my tuned profile for OVERTURE PETG. I found one on discord but it did not work for me.
So I tuned it in Orca with a .4 nozzle and a .2 profile. It may work for other printer, nozzles, layer height. YMMV
I would consider this a starting point not a one size fits all. Finer tuning may be required.
I hope this helps someone. I welcome any feedback or suggestions.
10/2/23 Update: After some fine tuning I found that the shrinkage settings need to go to 99 instead of 95. I will update the files soon.