Pool Toy - Torpedo Hollow and Screw-On
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Torpedo can be filled with any desired weight and then screwed on closed for lots of pool time fun
- Ocena
- 4,833 / 5
- Polubienia
- 37
- Pobrania
- 367
- Wydruki
- 6
- Wyświetlenia
- 1225
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fun Screw-On pool torpedo that glides smoothly through water! You can change the weight of the torpedo depending on whether you would like it to glide or sink more. I used coins, such as pennies, to weigh the torpedo down. Make sure to orientate model in slicer so that flat spots are on buildplate.
Disclaimer: Once Printed, the screws might be a little tight. Slowly insert the screw and turn it in and outwards to create friction and wear out the pieces so they fit smoothly.
Print Settings
Supports: HIGHLY Recommended for the overhang on the screw section (but not necessary, just wont look as smooth)
Material: PLA ( Stronger plastics might last longer)
0.2mm Layer Height
3 Walls (For strength since it will take a beating)
15-20% infill (Preferably more, the stronger side)
Printer: Voxelab Aquila X2