Slim Line Poop Chute for Bambu Labs X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slim line design poop chute with a removable bucket to empty the bits. Designed to use 10mm x 2mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 298
- Wydruki
- 2
- Wyświetlenia
- 2041
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design uses 10mm x 2mm magnets. The recesses for the magnets are 10.3mm in diameter to account for the shrinkage of PLA. They press in just right. You will need x5 if you print the scraper as well. The scrapers width is just right for getting the bits up the back without having to remove the whole bucket. The little extension is used to empty the bits into the bin. The main bucket and the extension will both fit on the build plate without modifying the build area. 3mf files have been supplied to load straight into Bambu Labs Slicer.