Prusa MKx Stock frame RAMPS Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For stock aluminum frame
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Had some trouble figuring out what parts would fit my aluminum prusa frame so I upload here with all the parts needed and clarifying what you should print:
If you have bear profiles use original version, from there v2 has removed support for stock frame and has bigger heat bed cable hole.
Print this parts
Lid:
For MK3 use prusa_ramps_lid.
For MK2 the lid needs to be smaller, otherwise it will collide with the y axis linear rails when opened, use prusa_ramps_lid_MK2.
Hinges:
Hinges for Mk3 from prusa github
For the base you can choose one of:
prusa_bear_ramps_base.stl original from cimoalpacino
prusa_stock_ramps_base-v2.stl I just added bigger hole for heat bed cable in case you have 12v thicker cables
I put all files here so you don't have to be chasing for them everywhere.
If holes on your frame are not M3 you can adjust your parts using my parametric version of frame attached parts
