Velcro Mobile Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable Velcro phone mount fits 58-100mm wide
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :)
I printed this with a 4 wall thickness and 70% infill to provide strength.
As for the velcro I used 20mm sticky velcro.
On the mount section I used 100mm hook (hard) velcro and pushed through and stuck it to itself
*Tip leave half of the backing paper on the glue side when feeding through slots*
On the main straps I stuck 350mm hook(hard) with 350mm Loop (soft) x 2 lots.
This will then velcro to it self when wrapping around objects.
*note* the mount section also has a screw thread through it so you can adjust the center point/balance of you phone
The clamp also works alot better with a phone case which most people have now adays but if you do not would suggest gluing a piece of rubber or even soft velcro in clap groves