Option-O Lagom P-100 - grind setting plate holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project is my solution to constantly moving grind setting plate in that grinder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I can't stand any more always moving (very week magnets) grind setting plate in Option-O Lagom P-100 grinder and this is my solution.
Just print the model and press the number plate into it, then press it all together into P-100 grinder. It should fit with proper friction to make moving the metal grind setting plate almost impossible (or, just impossible I should say). The whole holder should move within the grinder head with significant friction. In my grinder I can unscrew the burrs with it when I turn counter clockwise (of course I can rotate it, with a lot of friction when rotating clockwise to calibrate “zero” point as it should be).
My print settings:
0.2 layer height.
I print with ABS+ so the scaling is 100.6%
nozzle .4
infill - I guess, whatever you wish (my is 25%).
Basically adjust your settings as you like to make the friction the way you want it to be.
You can adjust the model in Fusion 360 by changing parameters:
grinder_fitting_tollerance - for the friction between the 3D printed holder and the grinder (bigger number - more friction)
number_plate_tollerance - for the friction between steel grind setting plate and the 3d printed holder (bigger number - more friction).