1 / 1
Option-O Lagom P-100 - grind setting plate holder — image 1

Option-O Lagom P-100 - grind setting plate holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This project is my solution to constantly moving grind setting plate in that grinder.

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
419
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

I can't stand any more always moving (very week magnets) grind setting plate in Option-O Lagom P-100 grinder and this is my solution. 

Just print the model and press the number plate into it, then press it all together into P-100 grinder. It should fit with proper friction to make moving the metal grind setting plate almost impossible (or, just impossible I should say). The whole holder should move within the grinder head with significant friction. In my grinder I can unscrew the burrs with it when I turn counter clockwise (of course I can rotate it, with a lot of friction when rotating clockwise to calibrate “zero” point as it should be). 

My print settings: 
0.2 layer height.
I print with ABS+ so the scaling is 100.6%
nozzle .4
infill - I guess, whatever you wish (my is 25%).

Basically adjust your settings as you like to make the friction the way you want it to be.

You can adjust the model in Fusion 360 by changing parameters:
grinder_fitting_tollerance - for the friction between the 3D printed holder and the grinder (bigger number - more friction)
number_plate_tollerance - for the friction between steel grind setting plate and the 3d printed holder (bigger number - more friction).

Tags