Light Saber Variation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Hacksmith's project and accepting 3DPrintingWorld's standard blades here's my go at light sabers
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I call it the FlangeSaber - inspired by Hacksmith's project (https://www.youtube.com/watch?v=xC6J4T_hUKg) and accepting 3DPrintingWorld's standard blades (https://www.printables.com/de/@3DPrintingWorld) here is my go at lightsabers.
Color changes are manual filament changes (downside - needs attention to not miss one and let the printer idle for too long), depending on your printer a MMU or AMS will certainly help.
Printed in various metal colored PLA (3DJake Ultra Satin Gold and Silver, Spectrum Spicy Copper). The "control unit" is a multi-part assembly, the model is scaled to fit.
Modeled entirely in Shapr3D on an iPad
Update: Flashlight Mod
Included are a modified endcap, the light insert and a new tail cap. For lighting, I've dismantled a rechargeable pen light I found on AliExpress (https://a.aliexpress.com/_EuQNQCT), you need the battery, the charger board, and the LED plus lens and holder tube ... you will figure out how and where to cut (I used a Dremel and some steady hands ...). To switch the light on when the blade deploys you need a tiny rocker switch, I used these: https://a.aliexpress.com/_EJORMwR
Check you tolerances!