Light Saber Variation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by Hacksmith's project and accepting 3DPrintingWorld's standard blades here's my go at light sabers
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 79
- Makes
- 0
- Views
- 743
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I call it the FlangeSaber - inspired by Hacksmith's project (https://www.youtube.com/watch?v=xC6J4T_hUKg) and accepting 3DPrintingWorld's standard blades (https://www.printables.com/de/@3DPrintingWorld) here is my go at lightsabers.
Color changes are manual filament changes (downside - needs attention to not miss one and let the printer idle for too long), depending on your printer a MMU or AMS will certainly help.
Printed in various metal colored PLA (3DJake Ultra Satin Gold and Silver, Spectrum Spicy Copper). The "control unit" is a multi-part assembly, the model is scaled to fit.
Modeled entirely in Shapr3D on an iPad
Update: Flashlight Mod
Included are a modified endcap, the light insert and a new tail cap. For lighting, I've dismantled a rechargeable pen light I found on AliExpress (https://a.aliexpress.com/_EuQNQCT), you need the battery, the charger board, and the LED plus lens and holder tube ... you will figure out how and where to cut (I used a Dremel and some steady hands ...). To switch the light on when the blade deploys you need a tiny rocker switch, I used these: https://a.aliexpress.com/_EJORMwR
Check you tolerances!