E-Axis Visualiser - Filament Type
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Loads of visualisers around.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Loads of visualisers around.
I wanted one to remind me what filament that I had loaded in case I needed to adjust the Extruder Idler (flex), or other printer settings.
Of course we still need to remember to change the visualizer when we change filament!
I didn't tidy these up before photos - so a little hairy!
Designed in FreeCAD.
Print instructions
No supports. It is a functional print so I used 0.2 layer height. Change it as you want.
The gcode is for printing with PLA; you may want to change the material to match the text label.
The recess on the back is for an 8 mm circular magnet - glue it in the recess on the back. I stack it with another 8 mm magent so that it clears the stepper motor body.