E-Axis Visualiser - Filament Type
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: e-axis-visualiser-pc_02mm_pla_mk3s_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Loads of visualisers around.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 45
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Loads of visualisers around.
I wanted one to remind me what filament that I had loaded in case I needed to adjust the Extruder Idler (flex), or other printer settings.
Of course we still need to remember to change the visualizer when we change filament!
I didn't tidy these up before photos - so a little hairy!
Designed in FreeCAD.
Print instructions
No supports. It is a functional print so I used 0.2 layer height. Change it as you want.
The gcode is for printing with PLA; you may want to change the material to match the text label.
The recess on the back is for an 8 mm circular magnet - glue it in the recess on the back. I stack it with another 8 mm magent so that it clears the stepper motor body.