VORON 0.2 Carrying handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carrying handles for the VORON 0.2
- Ocena
- 4,833 / 5
- Polubienia
- 58
- Pobrania
- 280
- Wydruki
- 6
- Wyświetlenia
- 1658
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Carrying handles for the VORON 0.2. They are supposed to be fixed on the main frame, not on the tophat.
They replace the original panel clips but you will have to add nuts (compatible with No-Drop Nuts mod or LDO drop-in nuts).
BOM (for each handle)
3* M3x12 (only button head tested but socket head might work)
2* No-Drop Nuts OR 2* drop-in nuts
Printing settings
The STL file is oriented correctly for printing, don't add auto generated supports since they are already included in the file.
Use Voron print settings, be sure to have a bit of cooling to ensure separation of the custom support. ABS is recommended so it has some flex without breaking.
Updates
07/05/2024 : fixed the design, one side was slightly unsymmetrical due to a mistake (~0.25mm)
Check out my other Voron 0 mods