DJI Phantom 3 RIS mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a RIS (Rail Integration System) for DJI Phantom 3 (All versions should be supported - Pro version in my case).
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a RIS (Rail Integration System) for DJI Phantom 3 (All versions should be supported - Pro version in my case).
There are three versions: 1.Down (on pictures) 2.Up and 3.Straight. You can print version "down" and "straight" without supports if you have a good cooling solution on your 3D Printer. (In my case Ender 3 with petsfang and 1x 5015 fan).
I don't recommend you to put anything heavy on this mount as it might seriously imbalance whole quadrocopter.
You can buy quick release mount (on picture) here: https://bit.ly/2m5hvnn
Or you can print one of these:
https://www.thingiverse.com/thing:61261
https://www.thingiverse.com/thing:891877
https://www.thingiverse.com/thing:1694532
https://www.thingiverse.com/thing:2065473
Print instructions
You can print version "down" and "straight" without supports if you have a good cooling solution on your 3D Printer.
Version UP needs supports!