1 / 6
A  Low Poly F-22 Raptor — zdjęcie 1
1 / 6

A Low Poly F-22 Raptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

5,01 € – 6,13 € netto (bez VAT)

Dla pliku: F22LoPoly_0.4n_0.2mm_PLA_MK4_6h34m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,57 € netto (środek widełek).

Masa podana przez autora
49 g
Czas druku podany przez autora
6,56 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Fighter Jet + Low Poly = Lighter Pet?

Ocena
0 / 5
Polubienia
40
Pobrania
199
Wydruki
0
Wyświetlenia
1334
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

After bringing the .stl into PrusaSlicer, I decided the “negative volume” out the nose needle and landing gear.   Also decided to print at draft quality because I like to torture my model prints to increase the probability the print will do well on other printer setups.  Once again, this model exceeds the print area of most home 3D printers, so you'll need to adjust the size to your setup.

I hope you enjoy!

Tagi