1 / 1
Voron 0.2 Rapido (1 or 2) HF hotend miniSB mount — zdjęcie 1

Voron 0.2 Rapido (1 or 2) HF hotend miniSB mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount for the Rapido HF with the standard V0.2 mini-Stealthburner. Works fine with a Rapido 2 HF as well.

Ocena
5 / 5
Polubienia
40
Pobrania
331
Wydruki
3
Wyświetlenia
1751
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

When building my Voron 0.2 with a Rapido, I came across the oft-referenced Rapido mount by Maverick (https://mods.vorondesign.com/detail/dWZjGJ83RbTpRTdYYRwng), but I was not satisfied with it because:

  • it requires printing a whole new miniSB cowling (which is slightly longer)
  • it requires giving up a few mm of max vertical height
  • because of the different cowling you can't easily combine it with other mods that replacing the cowling (like klicky's miniSB cowling)
  • it hasn't been updated with V0.2r1's improvements to part cooling ducts
  • the orientation of the mounting holes is not ideal and makes the Rapido's sock not fit well
  • it's a little bit too “open” around the heatsink, allowing a lot of the fan air to go around the heatsink rather than through it.

So I set out to redesign it to address the above.

This is the result: it shifts the Rapido a few mm higher in the mounting block and thus fits in the stock cowling, rotates it a little so that the wires and sock fit better, and provides a better channel to force more airflow through the heatsink.

Print using standard voron part settings.

Designed in openscad, using the Revo mount as a starting point (though heavily modified from there).  If using the openscad version, this is meant to work from the STLs/ directory of the Voron-0 repository so that it can load the stock Voron-0 Revo model as a starting point.

(The photo is the openscad rendering, since this is an internal part, but I've been using this successfully for several weeks in my V0.2 with a stock minisb cowling).

Edit: I'm still using this months later, now with a Rapido 2 HF which also works just fine.

Tagi