Voron 0.2 Rapido (1 or 2) HF hotend miniSB mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the Rapido HF with the standard V0.2 mini-Stealthburner. Works fine with a Rapido 2 HF as well.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 335
- Makes
- 3
- Views
- 1,758
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
When building my Voron 0.2 with a Rapido, I came across the oft-referenced Rapido mount by Maverick (https://mods.vorondesign.com/detail/dWZjGJ83RbTpRTdYYRwng), but I was not satisfied with it because:
- it requires printing a whole new miniSB cowling (which is slightly longer)
- it requires giving up a few mm of max vertical height
- because of the different cowling you can't easily combine it with other mods that replacing the cowling (like klicky's miniSB cowling)
- it hasn't been updated with V0.2r1's improvements to part cooling ducts
- the orientation of the mounting holes is not ideal and makes the Rapido's sock not fit well
- it's a little bit too “open” around the heatsink, allowing a lot of the fan air to go around the heatsink rather than through it.
So I set out to redesign it to address the above.
This is the result: it shifts the Rapido a few mm higher in the mounting block and thus fits in the stock cowling, rotates it a little so that the wires and sock fit better, and provides a better channel to force more airflow through the heatsink.
Print using standard voron part settings.
Designed in openscad, using the Revo mount as a starting point (though heavily modified from there). If using the openscad version, this is meant to work from the STLs/ directory of the Voron-0 repository so that it can load the stock Voron-0 Revo model as a starting point.
(The photo is the openscad rendering, since this is an internal part, but I've been using this successfully for several weeks in my V0.2 with a stock minisb cowling).
Edit: I'm still using this months later, now with a Rapido 2 HF which also works just fine.