1 / 2
Home Assistant logo - filament painting sign — zdjęcie 1
1 / 2

Home Assistant logo - filament painting sign

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little filament painting of the Home Assistant logo. I am putting it on my MoxBox that hosts Home Assistant for me.

Ocena
0 / 5
Polubienia
13
Pobrania
76
Wydruki
1
Wyświetlenia
440
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A little filament painting of the Home Assistant logo. I am putting it on my MoxBox that hosts Home Assistant for me. But you could also put it on the housing of a Raspberry Pi. You can find my other HomeLab logos on my profile.

You can scale the model, but don't scale Z or below colorswaps are not correct anymore.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ BLUE Transmission Distance: 3.5 (TD probably dont matter in this case)
PLA+ WHITE Transmission Distance: 4 (TD probably dont matter in this case)

Swap Instructions:
Start with BLUE
At layer #9 (0.8mm) swap to WHITE for the rest.
 

Tagi