Home Assistant logo - filament painting sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little filament painting of the Home Assistant logo. I am putting it on my MoxBox that hosts Home Assistant for me.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 76
- Makes
- 1
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
A little filament painting of the Home Assistant logo. I am putting it on my MoxBox that hosts Home Assistant for me. But you could also put it on the housing of a Raspberry Pi. You can find my other HomeLab logos on my profile.
You can scale the model, but don't scale Z or below colorswaps are not correct anymore.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ BLUE Transmission Distance: 3.5 (TD probably dont matter in this case)
PLA+ WHITE Transmission Distance: 4 (TD probably dont matter in this case)
Swap Instructions:
Start with BLUE
At layer #9 (0.8mm) swap to WHITE for the rest.