Counting matching models…
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
Переделка оригинальной зашивки от Flashforge . Все панели печатные, так же добавлено боковое крепление для катушки, интегрирован датчик температуры и влажности, добавлена панель под 4 сенсорные кнопки для управления различными функциями -…
A box for Heroforge figurines. If your character is brandishing a sword over their head or riding a mount, they probably won't fit. The inner dimensions are 39mm tall, 25.5mm x 25.5mm UPDATE - 05/02/2020: I've updated the lid so it slides…
0.08mm layer height 1st layer 0,16 0.16-0.72 black 0.72-1.12 green 1.12-1.92 orange 1.92-2.16 white If you like my models, you can simply support me, buying a coffee. https://buymeacoffee.com/makerofchaos https://buycoffee.to/pio-treklaguna
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer 8 (0.72mm) swap to Blue Gray At layer 10 (0.88mm) swap to Orange for the rest. 3mf file for bambu x1c included.
Pequeño pero funcional caja-contenedor para 50 muestras del “HueForge test”, impresa en PLA+. Como eje para las bisagras he utilizado un alambre rígido que tenía a disposición. Se puede adaptar a otros diámetros de alambre hasta 3,5 mm.
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
Check out the updated Deadpool and Wolverine Hueforge 3D print, now with even better color separation and a more vibrant pop! This artistic interpretation captures the dynamic and fierce nature of these iconic characters, featuring bold…
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
I was having issues with the front corners of magnetic build plate lifting up during prints that span most of the plate, so I made this clip to hold the front corners down. The hole on the bottom of the clip is so it attaches itself to…
This is a newer model of my original design: https://www.printables.com/model/798718-hueforge-funny-chinchilla-sign This is a funny sign that I made and have placed next to my chinchilla's cage! We refer to her as a potato quite often,…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
Anya Forger is one of the main characters of the Spy x Family series; she is a telepath whose abilities were created in an experiment conducted by an unknown organization. Anya is the adopted daughter of Loid and Yor Forger and is a…
PETG, 3 walls, 100% infill, the part is originally upside down so flip it in the slicer to print correctly
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
use standard hueforge parameters See the attached txt file for color changes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print uses 5 unique…
This is designed to work with the Adventurer riser lid enhancements for gluing purposes. It will allow you to align your parts perfectly for gluing them together. I didn't like the fit of the model so I cut off the tabs and reprinted them…
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
AI image - source community public gallery. Then used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Model size is 150 x 200 mm Do not adjust the height (Z) in your…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x240.06mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm…
I felt like putting a bullet between the eyes of every Panda that wouldn't screw to save its species. I wanted to open the dump valves on oil tankers and smother all the French beaches I'd never see. I wanted to breathe smoke. - Narrator…
Printed with ASA and 0.4 nozzle with 0.2 Layer height.
Project: 8b6e0e661654b854503d4035726e3d78.jpg Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x108.87mm in size You may print at higher layer heights below the Min Depth of 0.08mm The Max…
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Anycubic Black Transmission Distance: 0.3 PLA+ Anycubic Grey Transmission Distance: 2.2 PLA+ Elegoo White Transmission Distance: 5.4 This…
Here is a simple Hueforge for everyone of a Knight. The “original” Artpiece was AI generated and i put it in Hueforge If you own a simple printer like me who can only support one fillament at a time, use the custome gcode in your Slicer…
Hueforge Banksy “Mädchen mit Balloon” Verwendete Filamente: Polyterra Charcoal Black Polyterra Cotton White Polyterra Lava Red Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to White for…
Another of my mermaid images turned hueforge. Soon to be available as a potter's stamp. As a color wall-hanging it should turn out decent if you set layer height to 0.08 and perform color changes at layers 12, 19, 23, 28 & 33
Project: Himeno Whore Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Project: Nobara Kugisaki Creampie Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 129.83x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm…
Project: Makima Whore Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 145.97x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Emerald Typed Multicolor Filament up to 4 meters long , shaped as a swept octagon I built to work with my filament swatch/blender app. Key Features : Parametric Design : Adjust loss (filament lost to the extruder) and desired end length…
UPDATE: Updated the text on the model. Still working on a newer version and a non gridfinity version. Just don't have the time to finish them. I saw Flashforge had .25, .4, .6, and .8 nozzles for sell on Aliexpress, so I decided to make a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #15 (1.28mm) swap to Blue At layer #18 (1.52mm) swap to White for the rest.
Project: surreal_skull-1.hfp Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Red PLA+ Sunlu White This print uses 4 unique filaments Swap…
"Inoffizieller Inhalt" , "Fan-Made" Project: 33 Immortals Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x135mm in size You may print at higher layer heights below the Min Depth of 0.48mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.08mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm…
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Adapters that allow the assembly of external electronics, replacing the original one, using a raspberry, SKR Pico for the MCU and an EBB36 for the Headtool. the porting manages to recover all the functions or at least that is the goal. to…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte Red PLA Anycubic Vibrant Yellow PLA+ Sunlu White This print uses 4 unique…
Have you ever wanted a custom, movie-set quality mask... in METAL? Yeah, me too. And now it’s closer than ever. Thanks to support from JLCCNC , I’m one step closer to making that a reality. Their CNC machining services open the door for…
AI image - source/author: Andrey Bailey Then used HueForge v0.9.0 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Model size is 150 x 150 mm (or 200 x 200 mm second STL). Do not adjust…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
After printing the enclosure for Adventurer 5M I hit the infamous problem of filament sensor which is not working in reverse direction. I disassembled the sensor to figure out why this is happening. It turned out, that the metal bracket…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. The Model is 194.76x194.76mm in…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 4 unique filaments Swap…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
LED strip mount for Flashforge Adventurer 5M https://www.printables.com/model/1339050-channel-for-the-led-wire-fa5m https://www.printables.com/model/1339884-xl7015-led-ffa5m
🧹 Sisters of the Cauldron 🔥 “ Sisters of the Cauldron” captures a trio of classic witches cloaked in tattered robes, cackling over a glowing cauldron as neon green magic swirls into the night. Framed by gnarled, ghostly trees and lit by a…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
I used the original part for 2 months, but now I need more space behind my printer. So I created these two versions based on the original design. Changes: - Thinner walls (1 mm and 1.5 mm versions instead of 2) - Simplified geometry -…
For all the nostalgic people (like me), I created a copy of the Metal Gear Solid 3 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro It sticks to the wall with double-sided tape
Step into the world of Death Note with this Light Yagami HueForge bookmark ! Printed at 20x5 cm , this multicolor design highlights Light with dramatic fiery contrasts. Filament swaps used: Black PLA – Base Orange PLA – Flames and energy…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual…
Box s úchytom na odpad filamentu pre 3D tlačiareň FLASHFORGE AD5X
If you have a Flashforge Adventurer 5M, you likely noticed that there are bays in the back for a filterable exhaust. I didn't really feel like going down a rabbit hole of hooking up fans to the printer's power supply, as I just got the…
Printing tips Do not simplify the model. Dont scale the Z-Axis, otherwise the color layers no longer fit. Apart from the Z-axis, the model can be scaled as desired The Model is 48x187mm in size There are the stl files and the 3mf for…
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
Immerse yourself in the enchanting world of The Apothecary Diaries with this handcrafted HueForge inspired by the elegance of the imperial court! 🌸 Every detail captures the mystery and charm of Maomao and the most captivating anime of…
hue forge HaleyQueens (fait sur elegoo Centauri Carbon ) hauteur de couche 0,08 mm hauteur couche initiale 0,16 mm remplissage 100 % Commence par le noir couche n°8 passez au rouge couche n°10 passez au jaune couche n°11 passez au blanc…
This eerie yet enchanting artwork showcases a gnarled Halloween tree draped in glowing lanterns beneath a mischievous, smiling moon. With swirling skies, bats in flight, and hidden jack-o’-lanterns among the roots, it captures the gothic…
This print is designed for TPU. If printed in a rigid filament, this will likely only cause issues. An expedient strain relief/ cable erector to keep the AD5X Print head cable from getting caught behind the print head with the IFS moved…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Project: waves crashing at night Print at 100% infill with a layer height of 0.1mm with a base layer of 0.16mm COPE Panchroma Basic Black Transmission Distance: 0.1 (Don't worry! COPE is just an alternative to PLA so they mix fine!) PLA…
Simple design for Flashforge AD5X Spool holders, adding numbers to them to avoid confusion while loading filament. Just push the number to correct position and remember the rod has a hexagon shape, so you might need to rotate the number…
Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…
Project: 17.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm…
Project: slitta babbo natale.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed…
It's not a beast; it's a piece of the desert's own cruel soul, a ghost of the cataclysm that birthed the wastes. Its upper body is a terrifying construct of obsidian and captured sunlight, but it has no legs, just a swirling vortex of…
I know you all wanted this. Here is the Flashforge print nozzle storage box with the finger grabs AND the Flashforge logo on top of the lid. The “F” of the diamond logo is separate so you can infill it with the FlashForge blue if you…
There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…
Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…
I wanted to make some Andy Warhol Campbell soup style hueforges but couldn't find frame so came with this. You can make any grid you want, from single frame to 6x6 frames or more, if your hueforges share some dimension, you can even make…
Project: desertrats.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x178.65mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
