1 / 1
Meg Thomas - DBD - 3d Printed HueForge Painting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
Filaments Used:
PLA+ Anycubic Black Transmission Distance: 0.3
PLA+ Anycubic Grey Transmission Distance: 2.2
PLA+ Elegoo White Transmission Distance: 5.4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #11 (0.96mm) swap to White for the rest.