Counting matching models…
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
The Daylight on a Stick XXL from the Mellow AliExpress store has closer holes (285mm spacing) and connectors. This design is based off the V3 design ( Daylight Stick XXL Carrier V3.stl) with M3 brass inserts. I have moved the holes to the…
a 22.5 deg angle to mount the daylight-on-a-stick led board. uses a m3 pressed inset. two versions for the t-nut side the M5_2 is altered a little to not really need supports
An easy to print, simple mount for the Daylight XXL LED strip. The design features space to be able to route cables inside of it as well as blinders so the LEDs don't shine directly into your eyes. It is also designed with extra clearance…
Created a end cap baffle for the daylight on a stick. As my voron 2.4 sit's next to me sometimes the LED shining through via the end is slightly annoying. You can see the difference in the image. This print is only the small baffle not…
A simple holder for your daylight on a stick LED strips to mount on a 3030 aluminium extrusion. When using in an enclosure it should be printed in a temperature resistant material such as ABS or ASA. Currently mounted in RatRig Vcore 4.
The Huntress figure, in a Funko Pop! style. a character from the Dead by daylight universe Let me know what other character to create :)
Figurine Herman Carter alias The Doctor. One of the main killers from the game Dead by Daylight. As a funko pop :) I'm waiting for comments on what other characters to create :)
Simple Daylight on a stick holder. Hides wires from view and routes them into slot underside extrusion BOM: 2x Voron spec M3 heat inserts (M3x5wx4l) tool to depin your JST-XT 2pin for feeding wires in 2 x M3x8 for mounting daylight 4 x…
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is. The provided Step files are designed for a Voron 2.4 350, but I've…
I specifically wanted something that would block the LED lights from shining up through my smoked acrylic deck panel. For use with the Fizzy's Tech EMS, available here: https://www.printables.com/search/models?q=FT%20EMS
Check your leds temp, if they get too warm another version will be available soonish
Mount for the Daylight on a Stick XXL to the SVO8. Bracket mounts in the stock LED location. Use two M3x8 screws to mount bracket to top hat in factory location of SV08 LED Light. One M3x8 with M3 nut to mount XXL to bracket. I connected…
A simple snap-in bracket to mount Daylight On A Stick (https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight) or similar LED strip PCBs to a 3030 extrusion at a 45 degree angle. Requires one “Voron-spec” heat-set insert (OD:…
I had two Elmo 104 cameras but one was missing its daylight filter key, so I modeled a replacement based on the one that I had. Hopefully this is helpful to someone out there.
Nozzle used for printing - 0.2 mm Layer height - 0.1 mm Print duration approximately 45 minutes Without supports
Simple holder for Daylight on a Stick led strip for a Plasta Enclosure. You need two Ikea screws and a M3 8mm bolt and nut. Places the light cleanly on the side. Prints with no supports. PETG is recommended if the enclosure runs hot.
Case for Daylight on a Matchstick & Glowstick, based on @CoolBean's original design
The standard Daylight mounts dont work with Clee's Beefy Z Idlers. (BZI) so I made up a quick replacement.
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
simple mount for daylight xxl led bar. suitable for front and rear mount on sovol sv08
Made for Voron Daylight on a stick XXL (mounted on my RatRig V-Core 4 400) BOM for one led stick supports 2 pieces x M3 threaded insert 2 pieces M3x8 (or M3x6) 2 pieces M6x12 2 pieces M6 T-Nut for 3030 Voron Daylight on a stick support…
I needed a diffuser/cover for the lights I purchased for my Voron V0.2. I tried a couple models that I found online but none fit like I wanted, so I just designed my own. I printed using clear petg and it worked perfect. Hopefully these…
The ‘Daylight on a Stick’ (type ‘extra’) sold by https://www.alchemy3d.de has a different distance between the LEDs than the original ‘Daylight on a Stick’. This model is a remix of the baffle from…
made a slight adjustment so the matchstick doesnt hit the z tensioners
You will need the Jewelry Shoppe tie tack with 10mm pad to glue in the holes on the back of these badges. NO PAINT REQUIRED: I have designed it so you can change the filament to each of the colors. Lemme know in comments what other badges…
Had a couple Disco on a Stick LEDs laying around from a previous Voron 2.4 300mm build and found that it would fit perfectly in an Enderwire. This mount is designed specifically for Fizzystech's enderwire enclosure with holes that align…
Print out 25 Baffles for each stick. BOM 4 - M3x6 SHCS 2 - M3 Heatset Inserts 2 - M3 T-nuts
The Daylight on a Stick XXL from the Mellow AliExpress store has closer holes (285mm spacing) and connectors. This design is based off the V3 design ( Daylight Stick XXL Carrier V3.stl) with M3 brass inserts. I have moved the holes to the…
I have a new AD5x printer and found a 24vdc LED JST-XH port on the main board. I also had a couple of Daylight on a Matchstick pcb lights. I designed some slip in mounts to screw to the PCB lights and snap into the side rails of the…
Snap on bracket redesigned for 2020 extrusions One design for standard 2020 and another specific for 2020 V-Slot extrusions Takes 1 Voron spec heatset per bracket
Carefully manage your wire so the cover or the toolhead do not break it. Make the original brackets even more simple. Do not need to mount at the bottom, and most importantly, no heat insert!
Hardware 4x M3x8 4x M3 Roll-in nuts or M3 hammer-head t nuts 2x M3x5 2x M3 Heatset Inserts (voron style) Diffuser Thickness The pictures show the 1.4mm diffuser and LEDs running at colors set at 10% brightness. Print samples of each (the…
I want to add light in my flashforge ad5x printer. I found voron ledstrip and this project but I want to add magnet
BOM: 4x M3 screw - 8mm 2x M3 insert nut 2x M3 T-nut
Diffuser for daylight match stick leds. I used these to mount to the 1515 extrusions https://www.printables.com/search/models?ctx=models&q=micron%2B&ordering=popular
Daylight on a stick diffusers for 270mm length *has built in supports Use any 2020 led extrusion mounts
I made these 1/10 scale KC hilite covers to cover the lights on the Traxxas TRX-4 LED light bar. These are multi material printable. Print in PETG @ .20mm with 15% infill.
Parametric daylight developing tank for single sheet film. Put the sheet in emulsion-side up, and close the lid in complete darkness. Develop in daylight. Some of the design parameters might be wonky for other sizes than 4x5. Upstream…
Please don't forget to give me a Like. :) Replace the tiny LED strip on your SV08 with an LED Daylight Stick (version for Voron 2.4 XXL stick 370mm like this one from aliexpress). The main model is for the right side of the top frame from…
A set of requested perks as badges. Have yours made too! just message me on Thingiverse today! You will need some superglue and the Jewelry Shoppe Tie Tack with 10mm pads from Hobby Lobby. Category: Coins & Badges
I printed the mounts in ASA but ABS would be just as good. not tested on cooler printing filaments like PLA/PETG not 100% sure it will shrink enough for holes to match up. Printed the Diffuser in Transparent PC, Transparent PETG will work…
a 22.5 deg angle to mount the daylight-on-a-stick led board. uses a m3 pressed inset. two versions for the t-nut side the M5_2 is altered a little to not really need supports
Intro This is a Fog Vial, an item set to be released in the asymmetrical horror game Dead By Daylight starting July 29th, 2025. It can be used by survivors to spawn a cloud of disorienting gas, but now you can use it as a little bottle to…
Currently this Model only works for Voron 0.2 or similiar small printers with 1515 extrusions. ROAB short for R ainbow O n A B udget. The rectangular cutout on the back is for cable management if you only have one RGB port on your MCUs,…
The Daylight Disco on a Stick LEDs (RGBW) by Blamm are great PCB/RGBW LEDs design for lighting a 3D printer's encloser or any cabinet as long as you can provide 5Vs and neopixel signal. I installed them on my Voron 2.4 enclosers. They…
Based on the measurements from the Daylight website for the basic dimensions plus my calipers for button and hole locations, etc. I've done some small test prints to confirm the basic dimensions, which came out bang on with my (X1C)…
Mounts the Daylight on a Stick to the Screwholes of the Top frame and is perfectly top-Extension compatible if you use longer screws. Defaults to the right side (because the cable comes from there) but can be mirrored for the left side.…
From the game Dead by Daylight modeled using AI. Came out quite small.
Tested with PLA; if printed with TPU it might grip the tablet better. After printing simply attach to the side of the tablet (the long edge goes to the bottom side).
This would be good if scaled up for a automated pet door. Wifi and bluetooth are available on the board. You could easily set up a message to your phone are Nodered to notify of movement. I've had a Squirrelinator trap for about 6 months…
I took a regular Dead by Daylight hook model and resized it to fit headphones. I also shortened the hook so the headphones don’t lean on the table and sit nicely in place. Assembly: I just used glue for the whole thing, and it holds up…
The daylight on a stick version from Alchemy3d (https://alchemy3d.de/products/daylight-on-a-stick-1?variant=503377434708) has a different hole spacing then the standard version and it's not symmetrical. So I made a version for it.…
After printing the originals and noticing the hole spacing was way off I moved the screw posts to fit Mellow's 284mm hole spacing for their 370mm length Daylight On A Stick XXL
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Huntress Cosplay Mask from Dead by Daylight. The supports required. Some…
I own nothing of the design nor am I affiliated in any way with the Video creator, just put in some legwork for the community. Ladys and Gentlemen I present the Oni Mask from Dead by daylight I imported after the Video…
Redesign of my original design for the 270mm Daylight on a Stick v1.2
A totem inspired by the game DBD. Printing without supports. The skulls are printed separately, there is a variant of the skull with cracks. If you like my designs and want to support my work, you can find more information on my Раtrеоn.…
An easy to print, simple mount for the Daylight XXL LED strip. The design features space to be able to route cables inside of it as well as blinders so the LEDs don't shine directly into your eyes. It is also designed with extra clearance…
Created a end cap baffle for the daylight on a stick. As my voron 2.4 sit's next to me sometimes the LED shining through via the end is slightly annoying. You can see the difference in the image. This print is only the small baffle not…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print MiNA Cosplay Set from Dead by Daylight. The supports required. Some…
A simple holder for your daylight on a stick LED strips to mount on a 3030 aluminium extrusion. When using in an enclosure it should be printed in a temperature resistant material such as ABS or ASA. Currently mounted in RatRig Vcore 4.
The Huntress figure, in a Funko Pop! style. a character from the Dead by daylight universe Let me know what other character to create :)
Figurine Herman Carter alias The Doctor. One of the main killers from the game Dead by Daylight. As a funko pop :) I'm waiting for comments on what other characters to create :)
Simple Daylight on a stick holder. Hides wires from view and routes them into slot underside extrusion BOM: 2x Voron spec M3 heat inserts (M3x5wx4l) tool to depin your JST-XT 2pin for feeding wires in 2 x M3x8 for mounting daylight 4 x…
Ultimate Blackout Curtain Holder Pictures on the cover photo were taken with exactly the same camera settings. This curtain holder is designed to reduce the bleed of daylight into a bedroom by pulling the sides of the curtain close to the…
When you use a gantry with rails on the inside of the Y extrusion the space on the bottom is available for something nicer. More (performance) toolheads are being designed without the use of nozzle LEDs. Mount your Daylight, Daylight XXL,…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/i4QqpbQt3XX This Clip is not yet printed, but I needed an extra one for my LargeFormat Chromega Color Processing Film Tank. It should be printed in PETG…
This is 4x5 single sheet daylight developing tank. it requires 150ml of developer. You can easily load sheet in the dark bag and develop it at the daylight. For fixing and washing i recommend to use a small tray, its amazing to watch the…
/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////
Wanted a mount to put Daylight on a Stick LEDs in my Voron so I whipped these up. They should also work on any 2020 extrusion. *EDIT* I uploaded a one piece version; when the gantry on my 2.4 is at the top of the chamber the bowden tube…
There are two parts to this model: A holder for the daylight lamp with for screw holes at the back in 15mm x 15mm square A pipe clamp that can be screwed to those holes, and used to attach the lamp to various light fixtures. Almost all…
Michael Myers model extracted from Dead By Daylight. Needs supports and consider printing with "Print Thin Walls" turned on. His hair seems very hard to print Category: 3D Printing
Dead By Daylight very low light tower generator. Used ingame for maps and places where there's very low height to the roof. Category: 3D Printing
Dead By Daylight lower light tower generator. Used for most indoor maps with a decent height to the roof. Category: 3D Printing
Totem extracted from dead by daylight. The sticks that stick out of the eyes and bones seems very hard to print. Also needs support and maybe cut the bottom off in the slicer so it can stand better and make it way easier to print.…
Dead by daylight generator extracted from the game. Pretty hard to print. Definitely needs support. Category: 3D Printing
The perk Thanathaphobia from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 7 (0.12mm layer height) Should be printed at layer height 0.12 You should…
The perk Hex: Plaything from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 7 (0.12mm layer height) Should be printed at layer height 0.12 You should…
The perk Forced Penance from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 7 (0.12mm layer height) Should be printet at layer height 0.12 You should…
The perk Barbecue and Chili from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 7 (0.12mm layer height) Should be printed at layer height 0.12 You…
The perk Hex: Ruin from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 6 (0.12mm layer height) Should be printet at layer height 0.12 You should…
Small adapter for the mounting hardware so the Lidl LIVARNO lamp can be mounted on an angle. Used as a soldering lamp on my desk. The image actually show a smaller version, which basically was my test fit print where I sliced off the…
This is a mount for Daylight on a Stick , specifically for 250mm printers. It incorporates the baffle design from Vector3D's Daybreak PCBs and creates a mount that covers the entire PCB. BOM For each Daylight on a Stick, this requires: 14…
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
This cover is secured using mounting hardware for the Daylight on a match stick LED. This helps protect from being blinded by the LEDs when looking at print jobs. Update 2025-11-13: Uploaded mounting bracket, I didn't model the Mounting…
I did not like the 2 individual mounts for these ‘voron daylight on a stick’, made the 2 pieces connect so you can screw the mount in first, then the stick to it, easy, without measuring and lots of failures to mount m right. for sticks…
This is a minimal led holder for the Voron daylight. I used the following to mount it: 4 m6x12 4 m6 t-nuts 4 m3x10 4 m3 lock nuts Klipper config [output_pin daylight] pin: [Your Pin] pwm: True cycle_time: 0.01 value: 0.1 #10% power on…
A simple hook from Dead by Daylight. This is a prototype for a larger model that I'd like to make as a headphone stand. This one can handle earbuds only, try scaling up if you want to. This is my first try at designing a model for 3D…
This is a shielded LED bar mount for Voron 0.2 and likely 0.1 for the affordable “Daylight on a matchstick v2.1 by RZT”. This has an additional switch. Original design can be found here:…
My daylight bar came with a switch sitting in the middle (actually that's not a bad idea because I don't have any spare switchable 24v pinout left), so I remixed bjamdesign's model. It can be easily done in the Slicer, but just in case if…
This is remix of original model, was made to be able printed on Voron 0.2 with print area 120*120. Model needed to rotate 45 degrees on bed in slicer.
This is a remix of chirpy2605's Daylight on a Matchstick LED strip mounts for the Voron v0.x line of printers. The original uses a snap-in design, whereas this remix uses M3 screws and nuts for a more rigid mounting solution. Installation…
I improved a ‘Voron 0.2 shielded LED bar for Daylight on a matchstick v2.1 by RZT’ by @C0co_838112 This is a remix of a version that can be printed on Voron0 bed (you will need to rotate the model by 45dgr) Original Daylight LED Stick:…
Threw this together in tinkercad to cover up the lights, they were too bright and i couldn't find anything else that worked. Hope this helps someone else. They are by no means perfect, i really need to learn a real cad software.
