Daylight Disco on a Stick LEDs Shade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The "Shade" has baffles to block the light from shining upwards and directs it to the print bed.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 31
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Daylight Disco on a Stick LEDs (RGBW) by Blamm are great PCB/RGBW LEDs design for lighting a 3D printer's encloser or any cabinet as long as you can provide 5Vs and neopixel signal.
I installed them on my Voron 2.4 enclosers. They provide great illumination and fun with colors too! Unfortunately, they are so bright at full power that it blinds you!
That's where the “Shade” comes in effect. It not only blocks all the light from signing on your face but also directs it to the printing bed/plate. The LED strip is angled 45 degrees downward and is deisgned to mount on 2020 extrusions with M5 10mm bolts, 5mm T-nuts.
This shade is tested to fit Disco Stick - 270mm length - RGBW LEDs. I have not tried it on other sizes.
Parts used:
NOTES
The DIN JST side has embossed the “IN” word.
Groove for hiding the wires.