Counting matching models…
A cute little baby turtle that looks great sitting up on two legs, standing on all four, or just laying down to get some rest. This is an easy print-in-place that has been carefully designed to require no supports, and (at just 6 cm long)…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
It holds your iphone 15 Pro (Adjustable for others too) in place via the magnetic charger. Due to the iphones function to display a clock-screen while charging, this stand also makes for a nice tableclock. The phone is released by simply…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Version 2 Neu: Höhe 150mm - kompatibel mit Boxen Höhe 50 + 100 mm / gleiche Verbinder New: Height 150mm - compatible with boxes height 50 + 100 mm / same connectors…
Build a professional protective housing for your Raspberry Pi 5 with the official Raspberry Pi M.2 HAT+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry…
Build a professional protective housing for your Raspberry Pi 5 with Pimoroni NVME Duo integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PoE HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Baby shower / gender reveal party cookie cutters - baby bodysuit size: 75.08 x 87.40 x 15.00 mm (2.96 x 3.44 x 0.59 in) Contains **1** .stl file: **◇ Contour Cutter** (A single-piece cutter that outlines the shape without embossing a…
I'm really glad to present to you the little articulated grumpy dragon keychains. The results are amazing, especially the multicolored versions are very lovely. You get 4 multicolored versions, 3 of them with eyes and body colored.…
3D Printing Cost & Profit Calculator - Comprehensive Excel Tool for Makers and Businesses Take control of your 3D printing expenses and profit margins with this easy-to-use Excel sheet, specifically designed for 3D printing enthusiasts,…
🐱Please check out our other models.🧩 https://www.printables.com/@ManabunLab/collections/2268829 If you like this puzzle, there are many more puzzles available here: https://www.printables.com/@ManabunLab/store This model is a…
⚫ Skaro Dalek 1960s⚫ This is the last model for the year 2024. Expect a new models in 2025 Follow me on YouTube for more info about what you can look forward for. :-) ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can…
GADGET FOR HOLDING AND FASTENING 28BYJ-48 STEPPER MOTOR FOR YOUR PROJECTS
An extension to mount a 13" IPAD on the Joby Grip Tight Pro tripod mount. To install remove the two visible screws on the mount plate and replace base with printed part. Layer height 0.15mm Infill 15% Perimeters: 3 No Supports
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
I took the fabulous Tressym model by Yasashii and fused it with a base cobbled together from other bits and bobs to create a final model that had the Tressym in mid-air and supported by scenery rather than using an artifical-looking pole…
Snake Discovery baby snake hides for baby snakes to hide under and you can make it bigger for adult snakes. If you download it and like it give it a rating in the comments😊
This charming coaster brings joy to any table! The design features a chubby, adorable dinosaur in minimalist lines and a two-tone look. Perfect for dino fans or simply as a stylish accessory for home or office. The coaster has a diameter…
Just a Top Cover for @pwnate Tea Bag Dispenser to be able to use the area on top. Fits loose enough that you can lift it up from the exposed sides but is snug enough to no wooble arround to much.
The tray itself is 96mm (3.77in) x 249mm (9.8 in) and 73mmm (2.87 in) tall. It holds sleeves for organizing stamps. The dimensions in the name are the dimensions of the sleeves, not the model itself. I also made some tabbed dividers to…
Tabbed dividers, 90mm (3.77in) x 120mmm (2.87 in) tall, I made to help my wife organize paper crafting stamps.
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
Made by uploading Original Art to The Amazing www . lithophanemaker .com
An interesting model from KohlHertz over at Thingiverse. I did make one minor change - there are actually 15 pushrods needed - not 13 as the original STL specifies. Follow their printing instructions carefully. I printed at .1mm, 100%…
Testprinted in ASA, should work with pretty much all other materials. If you have multi material capabilities available, see the screenshot on which region to print in white (or translucent) to let the LED shine though.
Baby otter getting out of the cold on its momma otter. v1: Baby is more up-right / placed on mama v2: Baby is more snuggled into mama's belly. Mama has more of a tummy to support the baby.
Here are the instructions on making this cute Baby Panda Infill 15% Supports YES Brim NO Rafts NO 0.2mm layer height 2 walls 2 colors (Black & White)
Here are the instructions for this adorable Baby Koala. infill 15% Supports YES Rafts NO Brim NO 0.2mm layer height 2 walls 4 Colors (Grey, White, Black & Pink)
Biting Ratz by Muzz64 on Thingiverse. Press up on the tail to open its mouth. You can also print the “Bitten Heart” from my profile.
I was trying to install a new Delta bathroom faucet in a very cramped pedestal sink, and didn't have a wrench to fit in the close quarters under the sink. The nut to fix the drain to the bottom of the sink is about 45mm, and depending on…
Materiał z którego zalecam wykonanie to PETG, dla lepszej wytrzymałości Ociekacz na sztućce, o wymiarach. Jeśli ktoś potrzebuję mniejszego polecam po prostu przeskalować na wymiar jaki komu pasuje w slicerze drukarki. Pozdrawiam. Wysokość…
I made a switchplate for toby chuis amazing numpad design. helps with the positioning and alignment of cherry-like switches. https://github.com/tobychui/4xMacropad/tree/main/4x5Macro-Numpad It fits the screw holes of his numpad case, you…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
Attach your Philips Avent baby monitor video phone without drilling or gluing. Simply clip it behind the switch cover. Suitable for the LS switch program of the manufacturer Jung. Installation in just a few minutes. Easy installation and…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. I've printed this with some generic PETG on a Bambu Lab P1S using the…
After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. Since I used the same basic box sizes for both sets, this one has 2…
This printed center console cubby doubles the storage of your mk6 VW Golf/gti or mk5 Jetta. Simply remove your outdated MDI port, and snap this storage cubby into its place. Tight tolerances, durable side clips and the bottom locating peg…
Update (04/05/26) - fixxed eyetube on very short version to have the thumb screw m4 insert hole in the correct place. Update (01/05/26) - Added new very short version for the Travel Telescope V3.0 only (due to the mounting points being to…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant provides an optimal viewing angle without top-side cutout. Here we offer you the STL files for…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This vertical mounting variant provides an optimal viewing angle without top-side cutout. Here we offer you the STL files for…
A design request came in for Tubby's Drive-In from the movie The Hollywood Knights, which is an American teen comedy movie that was released in 1980. In the movie, the main characters are part of a car club who spend a lot of their time…
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
Baby Vaccination Aid – Pain Distraction Device This 3D-printed device is designed to help reduce the discomfort babies feel during vaccination. By providing a gentle sensory distraction, it helps mask the pain of the needle, making the…
Art by me. If you want the print in two colors, swap fillaments at 1.20 mm. No supports needed. Added slim version, which shows more fine details.
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
Salvador Dalí Salvador Dalí (1904-1989) was a prominent Spanish surrealist artist known for his eccentric behavior and dreamlike imagery in his work. His most famous painting, "The Persistence of Memory," features melting clocks in a…
OpenIPC RubyFPV Runcam camera base plate mounting
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
This is a cool tile inspired by @marina_113052 other haring heart design. I used multilateral painting by layer height for the four color design using my MK4S and MMU3. I printed with 0.4 Nozzle at 0.2 layer height, speed setting using…
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
** --- Bitte gib mir ein "Gefällt mir" , wenn du es herunterlädst --- ** ---------- Please give me a "like" if you download it ----------- Here is a board for "Moe's low poly from Dakanzla" https://www.thingiverse.com/thing:2893324…
For optimal results, i recommend printing the case with PETG, although PLA can also be used. After printing, simply apply double-sided tape to the printed part to ensure a secure attachment to your phone. Increase the number of bottom and…
Danke fürs laden & viel Spaß! → Leicht zu drucken (0.15 oder 0.20mm Schichthöhe) → Der mittlere Teil kann beliebig oft eingesetzt werden. → Ich habe einen 5x3mm Magnet verwendet: https://amzn.eu/d/itA4mnk → Für den Schlüsselanhänger habe…
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
Printed with Prusa MK4 Infill 15% Top and Bottom layer with hilbert curve (not required) PLA or PLA+ (but should work with every other material) Supports for drill holes are recommended
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
Update (Feb. 3, 2026): Improved heat insert holes for lid screws and improved vertical servo mount. Added screwing picture. Uploaded new versions of Housing_base and Housing_lid. Updated step file. Inspired by the Game No Man's Sky, I…
gabby dollhouse cake topper with the possibility of changing the name and number.
A gridfinity bin to hold Cenby Cable clippers. I don't know if it will fit others or not. I have included the freecad files for it, if you want to edit it.
Description Use cases : This is my creation of a Doby head shaped lace bead. Impression : PETG or PLA . Please give this design a like if you like it, or post a photo of your making! Good impression! Cas d'utilisation : Il s'agit de ma…
This model was originally designed by Mango3d please download and like the original model I had gotten permission from the creator to post this but remixes are turned off so the link leads to my make of the model from which the original…
Tileset for Kirby Nendroid display case. Assembly Instructions: Link: https://bit.ly/kirby-nendoroid Extras: 82 x D3H1 Magnets ( https://www.kjmagnetics.com/d3h1-neodymium-disc-magnet )
Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.
Baby Groot POP Representation of Baby Groot in Pop version printable in PLA or PETG with tree supports, taking care to remove those that support the hands, very delicately.
To help with equal spacing of pennies in the bottom of the boxcar. Keep the drilling saw dust to mix with wood glue to seal the pennies in.
Cars go inside and if they fit then they meet the requirements to race. This box is based on these requirements. I suggest printing in something a little translucent.
Instead of removing the safety clip off the door, use this clever safety bypass, enabling you to run the machine with the access panel removed to troubleshoot. Only to be used by a certified compressor technician. Printed in PETG 100%…
Easter decoration, contains symbols that characterize Easter and spring
I have a Regalo baby gate and the lock mechanism snapped after a few months of use. I tried glueing it and that worked for about a month then it broke again so I decided to model the part in fusion 360 so it's a better fix.
Model of baby dragon created via scylpture mod in blender. I used tree thin supports. You have to be careful when removing the supports from the wings and ears. I am attaching a picture of how you can paint it.
🐱Please check out our other models.🧩 https://www.printables.com/@ManabunLab/collections/2268829 Thank you for viewing. The sale, sharing, and modification of data is prohibited. If you wish to sell prints, please obtain a commercial…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant without top-side cutout. Here we offer you the STL files for 3D-printed housing parts,…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
Build a professional protective housing for your Raspberry Pi 5 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 4 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4…
This is my very simple but nice looking RingClock. It's based on an ESP8266 and ESPhome firmware. It can display time and different animations. Please take the ESPHome firmware as a baseline for future additions. The provided .step file…
This is my very simple but nice looking SlotClock. It's based on an ESP8266 and ESPhome firmware. It can display time and different animations. Please take the ESPHome firmware as a baseline for future additions. The provided .step file…
Build a professional protective housing for your Raspberry Pi Compute Module 5 IO Board. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the official Raspberry Pi…
![Doctor Who - SKARO DALEK [1960] by-MrHan/24](https://media.printables.com/media/prints/1037308/images/7871476_6d896f49-631f-4067-9ed8-b586fbb3b4c0_627546ca-fea3-4aa7-856b-eb81ec1bbc75/gg-6.png)
