4mm Drive Stubby Screwdriver
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.41 – €0.50 net (excluding VAT)
For file: 4mmStubbyDriver_0.4n_0.2mm_PLA_MK4_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 34.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stubby handle for 4mm drive bits
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a stubby screwdriver handle for short 4mm drive bits. The bits insert about 8mm. There is allowance for a 2mm magnet to hold bits in. It is designed for a press fit that doesn't need a magnet, this is what I used the most and have dedicated handles for some driver bits. If you want to be able to easily change bits then just scale it up a little at a time until you get the ideal fit. If you do that you will want to add the 2mm magnet to hold it in place.
The gcode is for the MK4. If slicing use a brim and colour change at 10 and 35mm.