1 / 1
Julie 3D Print Name with pencil by nikkibarba17 via Thingiverse — image 1

Julie 3D Print Name with pencil by nikkibarba17 via Thingiverse

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.49 – €1.82 net (excluding VAT)

For file: Smaller than the original (tiny) to fit in a 2.5 hour window / sweeping_name_plate_vzl_20190715-50-h5arz8_005m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.65 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
2.5 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Julie 3D Print Name with pencil by nikkibarba17 via Thingiverse

Rating
0 / 5
Likes
9
Downloads
145
Makes
0
Views
820
Reviews
0

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Attribution — Share Alike

 

Instructions for print:

faces_segment = 6
textstring1 = JULIE
textstring2 =
textstring3 =
HiddenText = TAYA
add_a_special_character = right
special_character = Pen
distance_special_char = .5
textsize1 = 16
textsize2 = 16
textsize3 = 16
distance = 1.1
fontname1 = Bangers
fontstyle1 = Regular
fontname2 = ‹same as fontname1>
fontstyle2 = ‹same as fontstyle1>
fontname3 = ‹same as fontname1>
fontstyle3 = ‹same as fontstyle1>
part_to_generate = sweeping_text
letter_caps_thickness = 1
base_radius_add = 4
baseheight = 1.5
cutangle = 65
text_excenter = 13
direction = up
BaseType = Round
border_topdown = 3
border_side = 5
Rounded_rectangle_radius = .4
HiddenTextSize = 4
fontname_hiddentext = ‹same as fontname1>
magnettype = None
magnet = [-9,9]
wiggle_around_magnet = 0.4
wiggle_magnet_depth = .4
magnet_closing_layer = 0

Tags