Counting matching models…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Removed usb bridge for more flexibility with controller header. Compatible with https://github.com/friction07/corne-xiao
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
This is a vertical 1 inch template for the pantorouter. It installs and uses the same bit and guide bearing as the factory templates but mounts vertically. It prints easy but will need supports underneath on the bed. The embossed text…
This model is compatible with the lego system.
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 1hr 30mins on my P1S For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are…
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
FR Vous pouvez le dimensionner en fonction de vos besoins Le trou peut être agrandi ou reformé directement dans votre slicer en utilisant un volume négatif. Pour une fixation simple, rapide et sans colle, utilisez la friction Montez le…
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
I've been needing a compact yet functional garbage can in my 3D printing workspace for some time, so I decided to design and print one! This waste bin is specifically designed to maximize the full print volume of the Bambu Lab A1 Mini,…
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
Scarecrow Halloween wall art. Print in parts main scarecrow piece then pick a number and a few sizes to print and place your bats.
components: 1) 4xM2 2) https://vi.aliexpress.com/item/4000559875991.html 3) https://vi.aliexpress.com/item/4000194710902.html 4) https://vi.aliexpress.com/item/1005001861065786.html 5) https://vi.aliexpress.com/item/1005001412953443.html…
Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…
“Take your wine camping, on a picnic, or to a festival. These lightweight, nesting wine glasses go anywhere with their unique stem design that unscrews and allows the bases to be compactly snapped into the bowls for storage. Super…
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
Size cca 150x150x50mm (A,B,C,D,E) and 200X200X75mm (F,G,H,I,J). Basket with handle:
The inscription was created at the request of my son. Printed in 3 letters. Adjustable size
EN I designed this sliding cover so that the lights of the Vodafone ConnectBox (Compal CH7465) don't disturb my sleep. Preferably in dark filament so that no light gets through. When attaching it, press it down evenly so that no layer can…
Držák na zed pro packout se zámkem na vložení a zajištěn Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník tištěno na výšku
Print the 2 parts and glue the lap joint. This model does not house a starlink plug adapter as I have converted to normal RJ45 plugs. Board houses 12v>>48v and 24v>>48v PSUs. Also added a USB LTE stick.
I printed it in PLA with 20% infill. I even made a lid with can hold a 12mm switch.
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Ce support permet de placer un RUT 240 et le célèbre 4G Wireless Routeur sur un tube et de le monter/démonter rapidement. Pour la mâchoire, prévoir 2 boulons M6x50 avec écrous, faire une pause pendant l'impression de vis.3mf pour insérer…
Keychain containing coordinates related to Outer Wilds. I ended up printing the smaller keychain for myself, I prefer that size.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
We ran out of space on our bookshelf, so now we have to place books in two rows. To make better use of the space, we want to add an extra shelf board a bit lower than the normal book height behind the first row of books. I didn’t want to…
Introduction Video: https://youtu.be/TQ_tjPChxrg The EXPANSION PACK 2 adds 16 new components to the Pocket Outpost kit. With the new components you're able to build crazy mechs, tanks, spacecrafts and more. Discover entirely new ways to…
multi use inlays for milwaukee slim packout: drill holder 1/4" bit holder low + high SDS-drill holder jigsaw blades
The Rear Panel kit for the rc2014 is and excellent addition to your DIY vintage computer, but I never really liked the two large openings in the back of the panel to access the modules. The Bump-Out-Boxes for the rc2014 solve this…
The perfect tool to make cookies shaped like piggy snouts. It comes in two parts, to make it convenient to extract the dough after cutting, therefore enhancing the baking experience. Quite satisfying to use I must say. It's pretty…
Diameters 55, 75, 100, 120mm, height 50, 75, 100, 130, 160, 190mm. Walls thickness 2.5mm. Tested PLA 0,2mm random seam. Jars without coil:
The bearings were constantly pulling off my print bed, and failing my print. I modified the gears and fused the bearings to the outer ring. The gears still spin with just the inner ring being unconnected.
Designed this adapter model to provide a snug fit against the router base, as well as allow adequate room for the latch to move once the adapter is attached to the base. Two models are provided: Generic connection to a dust collection…
Mon 1er modèle avec Fusion 360
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
A remix of 808Asher's design, with an added loop so it can be hung on a holiday tree. Filaments Used: Bellsprout Regular: Yellow: Numakers Lemon Yellow https://numakers.com/products/pla-filament?variant=46209336279348 Black: Elegoo Black…
After both parts have been printed, a 60mm*60mm piece is cut out of a foil. This foil goes between the top and bottom parts. The thicker the foil, the louder the horn. But be careful, the horn can be so loud that your ears hurt.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Router bit insets that fits the honeycomb wall by RostaP Print with the bottom down and use a brim I printed mine in 0.20 PLA PETG should work just fine
This is a remix of https://www.printables.com/model/254729-circle-router-jig-for-bosch-gkf-12v-8 Take a look there for more details. I have a 300x300 format printer and wanted to print the base of the jig in one piece. So i merged the…
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m. First complete parts B(C,D) and E(,F,G,H,I). Seconds models:
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
This is a pair of brackets, top one open and the bottom one cupped, for Milwaukee Packout toolboxes. Designed to hold long items like welding rod or paint poles and rollers, they are sized to allow them to be sleeved with 2” Schedule 40…
This is a quick and functional 3D reconstruction of the mouthpiece for the Katarek Travel nasal aspirator. I reverse-engineered the design by measuring the original mouthpiece and translating it into a 3D model using Fusion 360. The model…
I wanted to bring new life into a Outdoor Christmas Wreath I had. So I created this clip to allow for the replacement of dumb lights that it came with to be powered by WLED.
EN You can size it to suit your needs The hole can be enlarged or reshaped directly in your slicer using a negative volume. It can be hot-swaged or glued, depending on preference. No support 6 Perimeter anywhere Voilà FR Vous pouvez le…
Modelled these to fit on the cheap chronograph that you can get on Aliexpress (see screenshot). They are replacing the standard plates. I used new M2,5x5mm screws but I think you can also use the original screws with some minor adaptions.…
Inspired by r/cursedbenchies There is no rational excuse for spending time on this.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Native model: Onshape Model Play with dimensions in the part studio “parts” tab configuration. Global variables also available in the variable studio.
Size 108x135x105(hight)mm. For insert you can use brim. Tested PLA 0,2mm random seam. Next model:
The design intent was to be able to print parts in different colors to make painting a non-required step. I printed the 2 main body components in a seam-down orientation with a brim and supports at the bottom. This way, most of the…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports at 20 deg threshold angle, on build plate only and support crit regions only. Add a negative cylinder into the slicer to remove the text above the…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports (auto) at 20 deg threshold angle, on build plate only and support crit regions only. Add 3 negative cylinders into the slicer to remove the text…
Parts needed: A Heltec LoRa 32 V3 board 2x M3x14 bolts 2x M3 nuts
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
I printed in PETG Inland Red. Normal settings and bottom side down. You could glue it down but I prefer being able to take it out and move it around. It stays pretty secure thanks to the original design having the cut outs for the packout…
This is a simple model that can be mounted onto the DeWalt router. I have included holes for 6 to 18" holes. The name should not be changed. I am offering this model for personal use only. The orange jig pictured here is the first one I…
A charming, dog-shaped shadow puppet designed for interactive storytelling and creative play. The puppet can bark and wag its tail, bringing your shadows to life with expressive movements. Control both actions effortlessly using your…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Decorative tome for DND dice rolls Included with internal slide rails and without. Sizing the rails can be tricky to get perfect from printer to printer, so no rails works great as well, the drawer just won't be as secure. Want to buy a…
It's a bit jenk looking, as I barely know how to modify an STL, but I did what I could and it should be functional. I mostly hope that the original creator will share the original 3D files or make these new and improved versions…
Print the handle in PLA and the stamps using any flexible material, like TPU. Each can be printed without support with the connector pattern facing down.
Combined two models so they can be printed as one, printer can bridge the gaps without a problem
Universal Lockout Device to make sure that the VDE Second Safety Rule for electricians is observed: "Secure against Reactivation" To work safely on electric installation devices, you not only have to remove the related screw-in fuses…
A scalable design . Chain locket for DJs out there. No support required while printing.
Heavy-Duty mount for the Yellow Jacket 3 outlet 12 gauge “contractor” extension cord. May fit other similar designs. It accommodates #8 wood screws, including cabinet/washer head screws. Printed in PETG. Model is designed to print with…
Grave with realistic hands sticking out .. spooky.. ✋🤚👻 Print it however you would like.
Packout bin holder to be used with Omniwall organizational system. With and without clip, for use with plastic omniwall clip or similar pins. https://omniwallusa.com/omniclip-20-pack/?searchid=0&search_query=clip Supports recommended
As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…
The Ryobi plunge router came with a clear dust collector piece that attaches a vacuum hose vertically to it. It is prone to cracking and I didn't like the angle of the vacuum hose coming out. It also wouldn't work with my new camlock…
The fusion cell is a key part of the lore of Fallout games as well as the combat mechanism. As a platform for making other projects, such as a fallout themed battery bank or just a basic paperweight, this model is here to supplement…
