1 / 1
1/4" Drive Stubby Screwdriver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stubby handle for 1/4" drive short bits
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 70
- Makes
- 1
- Views
- 293
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a stubby screwdriver handle for short ¼" drive bits. The bits insert about 8mm. There is allowance for a 2mm magnet to hold bits in. It is designed for a press fit that doesn't need a magnet, this is what I used the most and have dedicated handles for some driver bits. If you want to be able to easily change bits then just scale it up a little at a time until you get the ideal fit. If you do that you will want to add the 2mm magnet to hold it in place.
The gcode is for the MK4. If slicing use a brim and colour change at 10 and 35mm.