1 / 2
RC Car,  Truck or Crawler Battery Spacer — zdjęcie 1
1 / 2

RC Car, Truck or Crawler Battery Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a small spacer to take up the extra room in the battery tray to keep the battery from moving around while driving.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
304
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made this for my Vanquish Phoenix. The gap between the battery in my situation is 16mm. If yours is the same, it should work for you. If you have a different gap you should be able to scale it a little bit. If that doesn't work, let me know and I can make a new version for you.

I printed mine in ASA at .2 layer height. The thin part that goes under the batter is .4mm (2 layers).

Tagi