Optimised EBB36 Orbiter Mount for V0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An EBB36 CAN bore mount for an Orbiter 2.0 in a V0, with cable relief optimised for 80mm tophats. Remixed
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
An EBB36 CAN bore mount for an Orbiter 2.0 in a V0, with cable relief optimised for 80mm tophats. I've remixed this from Chirpy's experimental PCB mounts - so check there if he's updated since this model was published.
I've made the strain relief much smaller and angled it 45deg. I've also lowered the EBB36 with 6mm in order to have as much space available for the CAN cable and limit the amount of rubbing it'll do to the top glass of the tophat. It didn't eliminate it, but it's much less than it used to be. I couldn't drop the EBB36 any more as it would interfere with the A and B motor blocks.
When used with the URBI mount from Maple Leaf for the reverse Bowden tube, it gives off a nice look with the two cables feeding in from opposite angles.
You'll need two Voron spec M3 inserts and M3x8 cap screws to mount the PCB to the mount