Milwaukee battery to XT60
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really small adapter for milwaukee battery to XT60 connector.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 1497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you need any help with assembly fell free to write comment and I will respond
Everything should be printed with 0,2 mm leyer thickness.
Print top part with supports inside.
The copper plate is 1mm wide and 7mm tall.
Mid plate is there for more helding stiffness and is 15mm long and cuted aroud 4 mm deep.
The two plates on a side are bent 90 degres obout 5.5mm long to the XT60 connector.
All three pins are about 7mm long from the housing.
All the parts are glued with epoxy glue.
Note: Milwaukee m18 batteries don't have internal switching circuit for undervoltage protection, so don't undervolt your batteries.