Kryptonite 1090 Evolution Series 4 Chain Lock Bike Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard 64mm bolt distance mount for the Kryptonite Evo 4 Chain Bike Lock.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 139
- Wydruki
- 2
- Wyświetlenia
- 1825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The Hook and Loop contest inspired me to solve a problem I've had for a long time, how do I mount my bike lock? This is a very popular lock, even recommended by the lock picking lawyer, so I was very surprised to find that there were zero models to be found. The Hook and Loop holes are modelled to allow for the Hook and Loop to be wrapped around itself. This helps keep a soft side on both the in and outside of the strap. So it doesn't stick to the lock fabric/pant legs.
Hope that other people can make use of this design too! If you are interested in adapters for other size of bike frame/rack mounts, then leave a comment!
DM if you are interested in using this design for commercial use.
Parts needed:
2x M5 standard bike mount bolts.
2x 600-700mm of Velcro stips (See Photos for dimensions)
Parts pictured were printed with a Bambu Labs P1S with Bambu Labs PETG Transparent and PLA Yellow. Printed using tree supports. I used a flat blade to break the sides out and pliers to pull the supports out. Can be printed without support depending on your printers dimensions.
Rev 2:
A third hole was added to allow for better mounting opportunities. Additionally the mount diameter has been expanded to remove the lock easier.