High & Mighty Shelf Filler - 410mm x 128mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High & Mighty shelf gap filler. 410mm x 128mm - You can resize to fit!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is such a simple model, I almost feel bad uploading it, but if it saves someone else measuring and modeling, awesome!
I purchased some shelves from High & Mighty on Amazon and realized that they had an approximate 2mm gap on the shelf. If you want to place something close to the front of the shelf (away from the wall), the item is likely going to lean back and likely fall! Items on the shelf were also 2mm+ below the lip of the shelf, so you can't see the bottom of the items. Bad for display!
So I decided to fix the problem and design a High & Mighty Shelf Filler. It's 410mm x 128mm and probably 2mm thick, I think. You print two of them, put them side by side on the shelf, and they'll keep your items upright, front and center on the shelf. Very nice!
If you have a different shelf with a different gap/size and can't easily resize in your slicer program, just let me know what your exact requirements are, and I can easily make you a custom space filler. Just let me know in the comments below and I'll do my best!
As always, I love to see makes, and I enjoy reading all of your comments, questions and suggestions!