Diagonal Universal Selfie Phone Holder

Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) 

Well after design my first phone holder, I starting to thing of ways to make it simpler, more compact, and with only 1 part to print twice really happy with the results.

The diagonal bracing means the phone can not slip out from top to bottom or side to side, and can be adjusted to any size.

Current the bracing brackets are set out so they miss the camera lens, however if your lens is on the right hand side then you can always mirror the parts so they go on the opposite diagonal. 

These were tested on iphone 6s and Xs with cases, if anyone wants them modified for another phone just let me know. Similarly if your case is bigger than 11.5mm  I could put some additional brackets design.

I printed this with a 4 wall thickness and 70% infill to provide strength.

As for the velcro I used 20mm sticky velcro hook and loop

On the strap I would suggest 450mm hook(hard) with 450mm Loop (soft) stuck together

This will then velcro to it self when wrapping around objects.

Obviously if you have a bigger phone you would have to adjust the length