1 / 4
Fixdry Filament Dryer Leg, Legs for K1 Max (5.25" lift) — zdjęcie 1
1 / 4

Fixdry Filament Dryer Leg, Legs for K1 Max (5.25" lift)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These legs raise the Fixdry filament dryer pictured to a height that it can use the original K1 Max bowden tube.

Ocena
0 / 5
Polubienia
14
Pobrania
85
Wydruki
0
Wyświetlenia
1727
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I designed these legs when I realized that the filament tube that comes with the K1 Max would not reach the output port of the fixed dry filament dryer. These legs raise this particular dryer 5 1/4 inches. The legs are very strong but mostly hollow with invisible internal supports, I would print these at 15-25% infill, but remember they are not using as much plastic as it would seem.

On the K1 Max they print at about one hour and two minutes each if done and a batch of four. On the same machine they print at about one hour and 20 minutes apiece individually.

I printed these with Creality Hyper PLA (This is an update although I printed them with hyper PLA to print very quickly, they ended up being fragile in the long run I would recommend something a little bit tougher, for instance PLA plus.)

2 walls.

4 top & bottoms.

I have included pictures of the fixed dry dryer connected to the K1 max printer. 

They work together wonderfully as a combination. What you can't see is the 2nd bowden tube heads to my Ender 2 which I am currently using to print TPU. It's kinda fun printing with two separate machines out of the same filament dryer.

Tagi