Fixdry Filament Dryer Leg, Legs for K1 Max (5.25" lift)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These legs raise the Fixdry filament dryer pictured to a height that it can use the original K1 Max bowden tube.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 85
- Makes
- 0
- Views
- 1,729
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I designed these legs when I realized that the filament tube that comes with the K1 Max would not reach the output port of the fixed dry filament dryer. These legs raise this particular dryer 5 1/4 inches. The legs are very strong but mostly hollow with invisible internal supports, I would print these at 15-25% infill, but remember they are not using as much plastic as it would seem.
On the K1 Max they print at about one hour and two minutes each if done and a batch of four. On the same machine they print at about one hour and 20 minutes apiece individually.
I printed these with Creality Hyper PLA (This is an update although I printed them with hyper PLA to print very quickly, they ended up being fragile in the long run I would recommend something a little bit tougher, for instance PLA plus.)
2 walls.
4 top & bottoms.
I have included pictures of the fixed dry dryer connected to the K1 max printer.
They work together wonderfully as a combination. What you can't see is the 2nd bowden tube heads to my Ender 2 which I am currently using to print TPU. It's kinda fun printing with two separate machines out of the same filament dryer.