1 / 2
Mount remix-Prusa MK3S Raspberry Pi Camera Mount — zdjęcie 1
1 / 2

Mount remix-Prusa MK3S Raspberry Pi Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix allows you to use M3 x 20mm screws for the entire camera mount, the mount was modified since the hardware…

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This remix allows you to use M3 x 20mm screws for the entire camera mount, the mount was modified since the hardware stores around me do not carry M3x25mm screws.

This remix is an adjustment to the raspberry_camera_mount _clip_ (right and left) parts in https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste; the adjustment allows using M3x20 screws for all parts.

Print instructions

To use M3x20 screws for the camera mount, print either the raspberry_camera_mount_clip_right-adjusted-20mm-screw or raspberry_camera_mount_clip_left-adjusted-20mm-screw from this remix, along with the other parts from https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste

Tagi