Mount remix-Prusa MK3S Raspberry Pi Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix allows you to use M3 x 20mm screws for the entire camera mount, the mount was modified since the hardware…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix allows you to use M3 x 20mm screws for the entire camera mount, the mount was modified since the hardware stores around me do not carry M3x25mm screws.
This remix is an adjustment to the raspberry_camera_mount
_clip_ (right and left) parts in https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste; the adjustment allows using M3x20 screws for all parts.
Print instructions
To use M3x20 screws for the camera mount, print either the raspberry_camera_mount_clip_right-adjusted-20mm-screw or raspberry_camera_mount_clip_left-adjusted-20mm-screw from this remix, along with the other parts from https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste