Quick release panel mount for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount to hold and quickly release panels for the enclosure with 2020 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
2023/11/18 Updated: The snap latch for 2020 extrusion were rigid and hardly loosened with an increase of the height. All of the snap latch mounts were adjusted to 3mm height. You can also change the shape of other panel mounts with the step file.
The quick release panel mount is a remix of the snap latch for 3030 extrusion used in SnakeOil-XY. This mount is smaller and so a little more rigid than 3030 extrusion version. You may need to loose the stopper by moving it several times. This mod is also modified for the different thickness of panel plus foam tape used in Voron2, for example, from 3mm panel + 0.5mm tape to 3mm panel + 3mm tape.
BOM
For each panel mount:
3.5-4.0mm: M3x16mm button head screw
4.5-6.0mm: M3x18mm or 20mm button head screw
2020 M3 T-nut
For each corner clip:
2 x M3x8mm socket head screws
2 x 2020 M3 T-nuts