Alternative Knobs for QRP Labs QMX Transceiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These knobs fit to the QMX transceiver from QRP Labs. They are mounted with a screw and have a softtouch shell as ring.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 1419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model contains an alternativ volume knob and a bigger VFO Knob.
Additional needed Material:
2x M2.5 x 4mm socket screw (Madenschraube)
Knobs
Material: PLA or PETG
Layerhigh: 0,2 mm
Infill: 20%
Softgrip Ring
In order to put the flat part on the print bed, turn the model 180° around before slicing.
(otherwise it will put the roundet top of the ring onto the print bed.
Material: TPU
Layerhigh: 0,2 mm
Infill: 0%
Assembly:
First mount the hard inner knob-core to the radio and fix them with a M2.5x4 socket screw.
The holes are wide enough, a thread is not needed, the screw will do it alone, do not overtighten the screw. Next step is to slip the soft knurled TPU ring over the hard knob core.