Alternative Knobs for QRP Labs QMX Transceiver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These knobs fit to the QMX transceiver from QRP Labs. They are mounted with a screw and have a softtouch shell as ring.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 166
- Makes
- 1
- Views
- 1,419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model contains an alternativ volume knob and a bigger VFO Knob.
Additional needed Material:
2x M2.5 x 4mm socket screw (Madenschraube)
Knobs
Material: PLA or PETG
Layerhigh: 0,2 mm
Infill: 20%
Softgrip Ring
In order to put the flat part on the print bed, turn the model 180° around before slicing.
(otherwise it will put the roundet top of the ring onto the print bed.
Material: TPU
Layerhigh: 0,2 mm
Infill: 0%
Assembly:
First mount the hard inner knob-core to the radio and fix them with a M2.5x4 socket screw.
The holes are wide enough, a thread is not needed, the screw will do it alone, do not overtighten the screw. Next step is to slip the soft knurled TPU ring over the hard knob core.