Original Prusa Enclosure MK4 xLCD Vacuum Bumper Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've developed a practical bumper solution for the xLCD display outside the Prusa original enclosure.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 88
- Wydruki
- 3
- Wyświetlenia
- 1429
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello there, I've designed a bumper for the xLCD display outside the Prusa original enclosure. I'm having issues with my vacuum robot, as it keeps colliding with and damaging the xLCD display whenever it moves in that area (normally, the printer remains on the floor).
To address this problem, I've developed a practical bumper solution. While it might not be the most aesthetically pleasing, it effectively serves its purpose for me.
The mixed PLA materials shown in the pictures were used for testing. I enjoy repurposing waste for prototyping. I will later include a picture of the final printed component.
Print Settings:
- InputShaper: 0,2mm speed profile
- PLA/PETG
- 0,2 mm layer height
- 15% infill (gyroid)
Material:
- 2x M3x16 screws (to attach it at the designated positions)
I've also included a pre-sliced version, both with and without InputShaping.
Best regards