1 / 5
Original Prusa Enclosure MK4 xLCD Vacuum Bumper Protection — image 1
1 / 5

Original Prusa Enclosure MK4 xLCD Vacuum Bumper Protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.29 – €2.79 net (excluding VAT)

For file: MK4 InputShaper Speed 0.2 - Prusa Original Enclosure MK4 xLCD Bumber v1_0.4n_0.2mm_PLA_MK4IS_1h49m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.54 excluding VAT (range midpoint).

Weight reported by the author
47 g
Print time reported by the author
1.81 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

I've developed a practical bumper solution for the xLCD display outside the Prusa original enclosure.

Rating
5 / 5
Likes
26
Downloads
88
Makes
3
Views
1,429
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Hello there, I've designed a bumper for the xLCD display outside the Prusa original enclosure. I'm having issues with my vacuum robot, as it keeps colliding with and damaging the xLCD display whenever it moves in that area (normally, the printer remains on the floor).

To address this problem, I've developed a practical bumper solution. While it might not be the most aesthetically pleasing, it effectively serves its purpose for me.

The mixed PLA materials shown in the pictures were used for testing. I enjoy repurposing waste for prototyping. I will later include a picture of the final printed component.

Print Settings:

  • InputShaper: 0,2mm speed profile
    • PLA/PETG
    • 0,2 mm layer height
    • 15% infill (gyroid)

Material: 

  • 2x M3x16 screws (to attach it at the designated positions)


I've also included a pre-sliced version, both with and without InputShaping.

 

Best regards

Tags